|
175C
Clark/Michigan 5 Cy loader nice condition
1985 175C Clark/Michigan loader. Serial number
490A338CAC.
We have owned this loader for several years. We
bought this loader from a Volvo dealer that took this 175C in on
trade for a new Volvo loader from the original owner. They had
several of these 175C that they traded in, this was the last one,
they kept it a couple years longer as it was the nicest 175C they
had, and it was used to load trucks at their material stock pile
yard. The second gear clutches started slipping a little so they
bought a new machine. I talked with the original owner and he
verified this information when we purchased the machine and said
that they recently put new turbo on this machine. The machine has
6625 total hours showing on it. We believe their accuracy we could
tell that this machine has been pretty well maintained and greased
regularly. Good tight machine.
We rebuilt all the clutch packs in this
transmission in 2010 and the transmission works well. It has a 310
hp Cummings NT-855C.
Turbo charged diesel. We did a complete in frame in February 2012
installed a new Cleveite kit including sleeves, pistons, rings,
rod and main bearings. Sent heads out to be cleaned and gone
through. Machine weighs approximately 57,780 pounds. It has 29.5
-25 radial tires with decent tread. Has a 5.5 cubic yard
general-purpose bucket with bolt-on cutting edge. It needs new
cutting edge the one on it has a piece broken out of it. It is a
bolt on cutting edge. The machine has front and rear lights,
strobe light, wipers, and good heater.
The driver’s side window has some cracking, all other glass
is good.
We used this
loader to load sand from our pit it has front and rear limited
slip differentials, lots of power. It loads sand excellently and
fills the bucket right up very quickly. In winter when we get
heavy snow we use it for plowing snow and it worked very well.
This loader is a big machine, yet small enough to drive
down the road or load on a low boy trailer to move. It is great
for loading dump trucks & semi dump trailers. We rebuilt the front
brake master cylinder and the front brakes work well. We have a
brand new kit for the rear master cylinder that needs to be
installed. The emergency brake works good. The paint was original
on the machine it was faded and worn off in areas so we power
washed, sanded, and painted with Nelson equipment paint (it the
best paint we have used it very durable and holds up from fading
very well) also has new decals. This is a nice machine it looks,
runs, and works well.
Click on this youtube link to see this machine
moving snow this was before painted.
http://www.youtube.com/watch?v=85pQ85pdOlk
Click on this link to see, 175 C Clark/Michigan
loader, brochure, specifications and machine dimensions.
http://www.volvo.com/NR/rdonlyres/7E101918-2FFA-4A82-9660-A34488E241BE/0/CM175C211xx8509.pdf.
Located in Sault Ste. Marie Michigan 49783.If
you have any questions or you would like to make arrangement to
see this loader please call Bruce at Burton Excavating at (906)
632-2641 if I am not in leave your name and phone number and I
will call back. Call my cell after 7:30 Pm. 906-440-2521.
|
